Muscle and Brawn Forums

Go Back   Muscle and Brawn Forums > Training > Powerlifting & Strength Training
Mark Forums Read
Register Articles Members List Search Today's Posts


Powerlifting & Strength Training Topics related to powerlifting and strength training.

Thread Tools Display Modes
Old 04-29-2012, 03:33 PM   #1
Max Brawn
LtL's Avatar

Join Date: Jan 2010
Location: Reading, Berkshire, UK
Posts: 12,054
Training Exp: 5 years
Training Type: Powerlifting
Fav Exercise: Deadlifts
Fav Supp: Endurance BCAA
Reputation: 460185
LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!LtL is one with Crom!
Default Joe Norman's meet report from his blog. This is why you don't quit.

Yesterday’s meet day started out like every other meet day. I got to the meet early, set my stuff down, got my rack height and went back to the warm-up area and rested. I was in the second flight so I was able to get a good 45+ minutes rest before I needed to get warmed up.

I planned on opening with 959 lbs. so I planned my warm-ups as follows:

Bar x 5
Bar x 5
145 lbs. x 3
145 lbs. x 3
235 lbs. x 3
465 lbs. x 1 – Start briefs
665 lbs. x 1
845 lbs. x 1 – Start suit

Everything was going well, until the last warm-up. On the way up the injury I suffered a few weeks ago in my right arm reoccurred. I felt something pop in my elbow join with shooting pain going down my forearm and up my bicep. Pissed off and discouraged, I was going to drop my opener, but my handlers convinced me that I should stick to my plan, deal with the pain and stay with the opener. I agreed and figured that we could re-access the situation after I opened. Here’s the video of my opener. I don’t have any more videos because I told my wife to forget about filming, that it was going to be a bad day.

As you can see by the video, I had absolutely no speed out of the hole that I usually have. I was so worried about my arm that I couldn’t concentrate on squatting. My plan for the competition was to open with 959 lbs. then go straight to 1,060 lbs. to try and get the all-time highest single-ply squat. After that opener, my handlers and I decided that it was best to take more of a conservative jump, so I went to 1,019 lbs. On my second attempt, I set up with the bar a little higher on my back to try and help the arm out a little, but as I descended, my arm just couldn’t keep the weight in place and it dropped a little on my right side. This caused it to shift and threw me off balance a little. I tried to compensate but when 1,000+ lbs. starts to move one way, 255 lbs. of muscle and bone just isn’t going to stop it, so I shook my head for the spotters to grab it. I passed on my third attempt.

959 lbs. – Good
1,019 lbs. – Miss

At this time, I was ready to throw in the towel. I was pissed off and my arm was hurting. *As I sat there with a frozen bottle of water on my arm, we had to come up with a new plan for the rest of the competition. My plan was to take a token bench and deadlift and call it a day, but my handlers had much more in mind. They knew how much I trained for the meet and that even with the injury I could possibly put a nice total together.

The plan we came up with for the bench was this. Ice the arm as long as I could before the bench started. Warm-up raw and find a relatively easy raw opener, then put on one of my larger shirts so it would not be so hard to touch and see what weight I could push up within the pain limits of the arm.

The Bench went like this:

Bar x 5
Bar x 5
135 lbs. x 3
225 lbs. x 1
315 lbs. x 1
405 lbs. x 1 – Start shirt
455 lbs. x 1
495 lbs. x 1

315 lbs. – Good (Raw)
551 lbs. – Good
600.7 lbs. – Good

On my last warm-up I was able to bring the bar within a one board to my chest so we decided that another 50 lbs. would make it touch, that’s why we went to 551 on the second attempt. The opener went easily. On my second attempt I was able to touch pretty well and push it up pretty hard. I left my belt unbuckled so the shirt could ride up and make it easy to touch. The only issue I had was at the lockout. When I bench, I get a good blast off my chest making my press more of a “throw up and catch” style. The bar comes up fast and I have to kind-of catch it at the top when it gets to lockout. This causes the bar to drop down hard on the arms at lockout. *I felt another pop in my arm again as I caught the weight and it took everything to not let the arm drop. It may have actually dropped a little but it wasn’t enough for the judges to red light me. At that time I was ready to pass my third, but my handler again said it looked like I had another 50 lbs. or so left in that arm so he convinced me to keep going. For my third attempt I decided that I needed to slow the weight down and not pop so hard of my chest, horse it up in a way, so I wouldn’t have the lockout hit. We readjusted the shirt and rolled the sleeves up as high as we could to get the sleeve pressure off the elbow joint. I also buckled my belt this time to keep the shirt from riding up. This time it took longer to touch but I was able to push it up slower and locked out slower. My lockout wasn’t the prettiest thing but I was able to get two white lights.

My plans for the deadlift were to open with 622.7 lbs. then try and push it over 700+ lbs. With the arm we had to change those plans as well. My handlers and I figured we would let me warm-up and see what the arm could take, then figure out an easy opener. We also decided that I needed to switch my grip. I normally deadlift with my right hand under and left hand over the bar; if I were to try and pull with the injured arm under, it would have hurt it even more.

Here’s how the deadlift went.

225 lbs. x 1
225 lbs. x 1
315 lbs. x 1
425 lbs. x 1
515 lbs. x 1
565 lbs. x 1

600.7 lbs. – Good (Lowered form 622.7)
650.2 lbs. – Good
705.2 lbs. – Missed

The overhand grip with the injured arm didn’t affect the deadlift very much at all. I was able to hold the bar without pain. The only issue I was having was switching my grip. When you train and compete for thirteen years one way and in switch something, it is just awkward to say the least. The first two attempts came up pretty easily but on the last attempt I floated the weight out in front of me and just couldn’t get it back in position.

Despite all the madness of the day, I ended up with a 2,209.9 total, my third highest personal total in single-ply gear, so I can’t complain. Also, going in to this meet I was under the belief that there was a $500 cash prize for winning your weight class. To my surprise, they did not give out money for winning your weight class, only the best lifters in the raw and single-ply division got cash prizes, $1,000 for each. My total was enough to win my class and take best lifter in the single-ply division. So I got to come home with $1,000 in my pocket. I owe it all my handlers for keeping me from quitting, for pushing me throughout the day and for coming up with back-up plans for the bench and deadlift.

I guess if there is any moral to this story it would be: *Don’t give up, don’t quit! You will be surprised what you are capable of when you fight through adversity and misfortune.

I spent 13 weeks training for this meet, got injured two week before it, re-injured on warm-ups, but with the help of my friends I was able to make a bad day into a good day. I may have not hit the goals I set out for but the day turned out well considering the situation.

P.S. I bought everone dinner for helpign me so much.
LtL is offline   Reply With Quote
Sponsored Links


blog, joe, meet, norman, quit, report

Similar Threads
Thread Thread Starter Forum Replies Last Post
Meet Report 29/01/12 Fazc Powerlifting & Strength Training 31 02-06-2012 10:33 AM
Swedes new training Log - 2010 bulk, and progress report! big_swede Training Logs 3493 02-01-2012 09:53 AM
I Just Quit Powerlifting! BendtheBar Powerlifting & Strength Training 24 01-21-2012 01:34 PM
Fullbody I quit! BendtheBar Muscle Building and Bodybuilding 22 02-25-2011 12:28 AM
2009 Olympia Report by Pro Bodybuilding Weekly Joe Weider General Board 0 09-30-2009 09:37 AM

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:56 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, vBulletin Solutions, Inc.