10 Shirted Bench Press Tips
10 Shirted Bench Press Tips
By Joey Smith
People are always asking me how to fix their bench press, how to get their technique better, or the obvious, how to get strong(er) on the bench press. I sat down each week for 10 weeks and gave a bench press tip, hoping to help someone that might be lacking in the area addressed by each tip. Did I cover every aspect of the bench press? No, but what I did try to do was give the most valuable tips that worked and helped increase my bench press over the years. I hope this helps some lifters that are having difficulty with their bench press. These tips are more suited for a geared shirted lifters, but some of these tips can still be utilized for the raw guys, too. I hope this helps. If you have any questions on this or any others, contact me on the Q&A or comment section below and I will do my best to answer your questions the best I can.
Metal Ace Pro Bench Shirt
If you’re having trouble touching the bar, try wetting your collar and chest plate with good ol’ H2O. Just get a spray bottle, fill it up with water and keep it in your gym or gym bag. Wetting the collar allows the material to stretch easier, which can help you get the bar down.
2. Dig into the Pad
When setting up on the bench, make sure you dig your traps into the pad of the bench, so you can get a good, solid foundation. Be sure to pull your shoulders and lats back tight to the pad and don’t roll your shoulders back up when you receive the bar from your handler. This will give you better stability and keep your shirt in place.
3. Pull Back
As you set up on the bench, be sure to pull your shoulders back as hard as you can. Do this before the weight is handed to you. Pulling back the shoulders allows your lats to provide a strong(er) and better foundation. Plus, you’re utilizing the power from your lats in conjunction with your triceps, when you push the bar up.
4. Eyes Under the Bar
Make sure your eyes are under bar. Before you lift the barbell off, it’s important that your body is positioned correctly on the bench. The easiest way to ensure your position is correct is to have your eyes directly under the bar.
Learn to create a good arch. A good arch can cut 2, 3 or more inches off your stroke. Be sure to keep your butt on the bench while arching. Placing a 4-inch PVC pipe under my lower back while laying on the bench in the beginning, helped me start learning how to get an arch. As I got better, I started using a 6-inch foam roller on all of my raw sets to help me with my arch and to stretch my lower back.
6. Bend the Bar
When taking your handoff, be sure to grab the bar tight and try to “bend” the bar. This will help with your stability and always make sure you’re tight throughout the lift. Be sure your lats and triceps are doing the work, as you descend and push up. Stay “tight.”
Technique is everything.
7. Leg Drive
Leg Drive: This power comes through your feet and legs. This fortifies the arch in your back, stabilizes your body and focuses the energy towards your upper body. However, pushing through your legs doesn’t mean to raise your ass off the bench. The front of your feet should be trying to press through the floor as you try to press your heels to the floor. This takes a lot of practice to get correct, but what else do you have to do?
8. Deep Breath
Make sure to take a deep breath before you lower the bar (take a breath at handoff and hold it). Hold it in as you bring the bar down, pushing your belly to “meet” the bar and continue to hold your breath as you push the bar upwards. Don’t let your breath out until you complete the rep. This technique gives you better core stability and spinal reinforcement. This will lead to a stronger bench press and better over all tightness and greater stability.
9. Elbow Flare
When coming down with the bar, keep your elbows flared out to allow the shirt to help “carry” the weight down. As the shirt tightens up, begin to cut your elbows in so that you can touch the bar to your belly area. Once you touch, flare your elbows back out immediately, as fast as you can, to create the momentum and power needed to press maximal weights to the locked position. When pressing the bar up, fade the bar just slightly back over your eyes. Remember to explode the bar upwards. Contract your muscles forcefully to lift as fast as possible. Even if the bar goes up slowly, you’re still delivering maximal force output.
Visualize the lift. “What is visualization?” In essence, visualization simply means using your creative imagination to see something you want and achieve it. Always see yourself over and over again, going through your checklist and successfully completing the lift every time. Arch, take a deep breath, grip the bar, get tight, leg drive and press upwards.
|All times are GMT -5. The time now is 03:06 PM.|
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, vBulletin Solutions, Inc.