7.5kg (not sure about the maker, just the seller)
Manufacturer/name found on the KB: none
Material/s used in the KB (as seen/known): cast iron, base to handle covered in some sort of hardwearing vinyl
Weight of KB you are describing: 7.5kg KB
Dimension of the base (diameter): 2.75
Height of KB to the top of the handle: 7.5
Width of KB (diameter of main bell part): 4
Width/circumference of handle (OR diameter if the manufacturer has stated it in their informational breakdown): 1.25
Length of handle (distance between horns, uprights of handle): 5.25 (at the flare), 2.75 (base of flare) [a very flared handle]
Depth of space between handle and KB: 2.75
Whether the KB has any flat sides: one flat side which runs in line with the handle, the reverse side can be used instead so it is still suitable for snatches.
Whether KB has any raised lettering anywhere on it: no raised lettering.
Dimensions of each KB within the make, if they vary in size
Whether the bases are flat or have nodules/bumps due to poor finishing: flat base, good finish
Any additional info you think may be helpful to the reader: handle flares outward at the top, so there is more space at the top than nearer the KB itself, not that it is an issue
All measurements in inches
36.5 kg /80.3 lb Middle-Finger DL (right hand)...
Last edited by 5kgLifter; 07-30-2011 at 02:57 PM.