Fitness Mad KBs
Manufacturer/name found on the KB: Fitness Mad
Material/s used in the KB (as seen/known): cast iron, base to handle covered in some sort of hardwearing vinyl
Weight of KB you are describing: 24kg KB
Dimension of the base (diameter): 4.5
Height of KB to the top of the handle: 10
Width of KB (diameter of main bell part): 7 and 3/8ths
Width/circumference of handle (OR diameter if the manufacturer has stated it in their informational breakdown): 1.5
Length of handle (distance between horns, uprights of handle): 6.25 (at top flare), 5.75 (mid-handle)
Depth of space between handle and KB: 2.75
Whether the KB has any flat sides: two flat sides which run in line with the handle, not ideal for snatches due to the flat surface which will hit the arm.
Whether KB has any raised lettering anywhere on it: none
Dimensions of each KB within the make, if they vary in size: no idea
Whether the bases are flat or have nodules/bumps due to poor finishing: flat base, good finish
Any additional info you think may be helpful to the reader
All measurements in inches
36.5 kg /80.3 lb Middle-Finger DL (right hand)...
Last edited by 5kgLifter; 07-30-2011 at 02:56 PM.